> "Porting Guide"
>
> It says:
> "...
> int startBlock
>
> The block number (not the address in bytes) on the chip of the first block
> of this logical yaffs_Device. Beware, yaffs needs the first block to be
> free so you should not set this to 0, if it is then yaffs will add on one
> to it itself and also add on one to the end block which could be an issue
> if you wanted your device to start at block 0 and finish at the last block
> which might mean yaffs trying to write to a non-existent block.
> ..."
Yuck. That second sentence seriously needs to be refactored to be
understandable ...
/Ricard
--
Ricard Wolf Wanderlöf ricardw(at)axis.com
Axis Communications AB, Lund, Sweden www.axis.com
Phone +46 46 272 2016 Fax +46 46 13 61 30
(text/plain)