[Yaffs] yaffs mount/umount problems

[Andre Renaud]

Livio Tenze wrote:
> Hello Charles,
> 
> I have a problem with the yaffs. I succeded to properly compile and
> mount the yaffs filesystem with my NAND (I have an MX21 board with 64M
> Nand). The problem I encountered is the following:
> 1) I erase the Nand device with mkyaffs and mount the yaffs: mount -t
> yaffs /dev/mtd/5 /mnt

Are you sure you're mounting the correct device? I was under the
impression that yaffs required you to mount the mtdblock devices, it:
/dev/mtdblock5, or /dev/mtdblock/5.

Andre
-- 
Bluewater Systems Ltd - ARM Technology Solutions Centre

       Andre Renaud                             Bluewater Systems Ltd
Phone: +64 3 3779127 (Aus 1 800 148 751)        Level 17, 119 Armagh St
Fax:   +64 3 3779135                            PO Box 13889
Email: arenaud at bluewatersys.com                 Christchurch
Web:   http://www.bluewatersys.com              New Zealand