[Yaffs] Static yaffs2 library

[Charles Manning]

Yes, there's YAFFS Direct. This is the "RTOS flavour" of YAFFS that is
easy to set up for use with or without an OS.

A few people are shipping product based on YAFFS with NOR. Although
YAFFS was designed for NAND, it does also work with NOR. You just need
to simulate the NAND pages. If you look back in the list archives you
should find some references to this.

-- Charles

> -----Original Message-----
> From: yaffs-admin@stoneboat.aleph1.co.uk=20
> [mailto:yaffs-admin@stoneboat.aleph1.co.uk] On Behalf Of Shaun Jackman
> Sent: Wednesday, 20 April 2005 4:43 a.m.
> To: yaffs@stoneboat.aleph1.co.uk
> Subject: [Yaffs] Static yaffs2 library
>=20
>=20
> I started to compile yaffs2 for an arm-elf embedded target,=20
> but yaffs_fs.c did not find the Linux headers it was=20
> expecting. Is it possible to compile yaffs to provide a=20
> typical open/read/write/close interface in a static library,=20
> and is it possible to use yaffs with a NOR flash chip on a memory bus?
>=20
> Cheers,
> Shaun
>=20
> _______________________________________________
> yaffs mailing list
> yaffs@stoneboat.aleph1.co.uk=20
> http://stoneboat.aleph1.co.uk/cgi-> bin/mailman/listinfo/yaffs
>=20