Cumana 300i IDE CD-ROM help

Information supplied by Cumana

To get your 300i CD-ROM drive working with RISC OS 3.6 or 3.7, you should take the following steps. Please note, these are different to the details given with the StrongARM installation guide; these instructions should be used in preference.

• Remove the application !BootIDECD from the PreDesk directory in your !Boot application. DO NOT delete it as you will need one of the modules in a moment.
  
• Hold down the Shift key and double-click on !BootIDECD. A window will open showing the contents of the application.
• In this window, find the module called iscld_2. Copy this back into the PreDesk directory.
• Press F12 and type *UnPlug CDFSSoftATAPI
• Reboot your computer
• Double-click on !Boot to run the configure application
• Go into the Discs option and set the number of CD-ROM drives to 1 (or however many CD-ROM drives you have attached)

islcd_2 is the filename for the module CDFSSoftISLCD. The latest version of this module is 1.06 - you can check which version you have by pressing F12 and typing *Help CDFSSoftISLCD. If your module is very far out of date Contact Cumana.

For more help please EMail support@cumana.co.uk