look at the Yaffs Direct Interface document, make your own 'glue logic' -
see yaffs_osglue,c and create the appropriate interfaces as listed in the
document.

Chris Gofforth / Pr Software Engineer

MS 131-102, Cedar Rapids, IA, USA

Phone: 319-295-0373 Fax: 319-295-8100

Chris.Gofforth@rockwellcollins.com

www.rockwellcollins.com


On Tue, Feb 3, 2015 at 2:31 AM, Oleg Uzenkov <ouzenkov@cogniance.com> wrote:

> Hello All,
>
> Please could you point me to any examples of how YAFFS can be build,
> ported into a NON Linux or eCos environment.
>
> I am using WICED framework (Broadcom's wi-fi). I have a choice of using
> either FreeRTOS or ThreadX on a custom board (STM32 + bcm43362). I would
> like to see an example of how building, porting could be done in general.
>
> Everything I googled on the internet is for adding YAFFS  into Linux
> kernel. Scripts that are in the YAFFS repository are for building into
> Linux. So far I could not figure out how to make adaptions for anything
> other than Linux or eCos.
>
> I would appreciate any directions for how YAFFS can be ported onto a raw
> Nor flash.
>
> Thanks in advance,
> Oleg
>
>
>
> _______________________________________________
> yaffs mailing list
> yaffs@lists.aleph1.co.uk
> http://lists.aleph1.co.uk/cgi-bin/mailman/listinfo/yaffs
>
>